H3DK

Связаться с отделом продаж

Простая установка в панели

Таймеры H3DK вводятся в качестве замены для давно представленных на рынке таймеров H3DE. Серия H3DK полностью совместима по производительности, функциональности и размерам с предыдущей серией.

Безопасный для пальцев клеммный блок и невыпадающие винты согласно стандарту EN 50274
Новая модель 12 В= представлена во всех подсемействах
Новая модель звезда-треугольник с напряжением питания до 440 В~
Устройства 24 и 48 В интегрированы в одной модели таймера ВЫКЛ-задержка
Расширенный диапазон времени (Настройка времени от 0,1 с до 1200 ч)

Ordering information

Type	Supply voltage	Control output	Time setting range	Operating modes	Order code
Multi-functional standard timers	12 VDC	SPDT	0.1 s to 1200 h	ON-delay, flicker OFF start, flicker ON start, signal ON/OFF-delay, signal OFF-delay, interval, one-shot	H3DK-M1A DC12
		DPDT			H3DK-M2A DC12 1
		SPDT		ON-delay, flicker ON start, interval, one-shot	H3DK-S1A DC12
	24 to 240 VAC/VDC	SPDT		ON-delay, flicker OFF start, flicker ON start, signal ON/OFF-delay, signal OFF-delay, interval, one-shot	H3DK-M1 AC/DC24-240
		DPDT			H3DK-M2 AC/DC24-240 1
		SPDT		ON-delay, flicker ON start, interval, one-shot	H3DK-S1 AC/DC24-240
		DPDT		ON-delay, flicker ON start, interval, one-shot	H3DK-S2 AC/DC24-240 1
Twin timer	12 VDC	SPDT	0.1 s to 12 h	Flicker OFF start, flicker ON start	H3DK-FA DC12
Twin timer	24 to 240 VAC/VDC	SPDT	0.1 s to 12 h	Flicker OFF start, flicker ON start	H3DK-F AC/DC24-240
Star-delta timer	12 VDC	2× SPDT	1 to 120 s	Star-delta	H3DK-GA DC12
	24 to 240 VAC/VDC				H3DK-G AC/DC24-240
	240 to 440 VAC				H3DK-GE AC/DC240-440
Power OFF-delay timer	24 to 48 VAC/VDC	SPDT	1 to 120 s	Signal OFF-delay	H3DK-HBL AC/DC24-48
	24 to 48 VAC/VDC		0.1 to 12 s		H3DK-HBS AC/DC24-48
	100 to 120 VAC		1 to 120 s		H3DK-HCL AC100-120V
	100 to 120 VAC		0.1 to 12 s		H3DK-HCS AC100-120V
	200 to 240 VAC		1 to 120 s		H3DK-HDL AC200-240V
	200 to 240 VAC		0.1 to 12 s		H3DK-HDS AC200-240V

Note: There are other model available on request. Please contact your Omron representative for special request.

Specifications

Operating voltage range	85 to 110% of rated supply voltage (90 to 110% for the 12 VDC models).
Power reset	Minimum power-off time: H3DK-M/S, H3DK-F: 0.1 s, H3DK-G: 0.5 s. (Not for H3DK-H)
Reset voltage	10% of rated voltage. (Not for H3DK-H)
Voltage input (H3DK-M/-S)	24 to 240 VAC/DC: H-level 20.4 to 264 VAC/VDC, L-level 0 to 2.4 VAC/VDC.
Voltage input (H3DK-M/-S)	12 VDC: H-level 10.8 to 13.2 VDC, L-level 0 to 1.2 VDC.
Control output	Contact output: 5 A at 250 VAC with resistive load (cosφ = 1), 5 A at 24 VDC (30 VDC for -M/-S) with resistive load (not for H3DK-GE)
Ambient temperature	Operating: -20 to 55°C (with no icing), storage: -40 to 70°C (with no icing)
Accuracy of operating time	±1% of FS max. (±1% ±10 ms max. at 1.2 s range)
Setting error	±10% of FS ±0.05 s max.
Minimum input signal width	50 ms (start input) (Only for H3DK-M/S)
Influence of voltage	±0.5% of FS max. (±0.5% ±10 ms max. at 1.2 s range). For H3DK-G: ±0.5% of FS max.
Influence of temperature	±2% of FS max. (±2% ±10 ms max. at 1.2s range). For H3DK-G: ±2% of FS max.
Life expectancy	Mechanical: 10 million operations min. (under no load at 1,800 operations/h)
Life expectancy	Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 360 operations/h)
Degree of protection	IP30 (terminal block: IP20)
Terminal block	Clamps two 2.5 mm 2 max. bar terminals without sleeves
Size in mm (H×W×D)	79×22.5×100