- Задачи
- О компании
- Статьи
- Продукция
- Внедрения
- Новости
- Контакты
Наш менеджер в течении 30 минут свяжется с вами
Номинальные параметры Класс 200 В, трехфазные: от 28 А до 248 А Класс 400 В, трехфазные: от 11 А до 414 А
Note: U1000 includes EMC filter, input AC reactor, regenerative converter and frequency inverter.
Note: The U1000 model has an IP00 protection class. For the IP20 protection class, install the IP20/Nema1 kit.
Note: This table corresponds with HD rating. When ND is used, please choose the reactor for the next size inverter.
Provides a simple way of installing the LCD | |||
USB converter for PC tool usage and copy unit for easy parameter setup duplication and backup in one |
Input current at HD1 | ||||||||||||
Input current at ND1 | ||||||||||||
Rated input capacity at HD2 | ||||||||||||
Rated input capacity at ND2 | ||||||||||||
Rated output current at HD3 | ||||||||||||
Rated output current at ND3 | ||||||||||||
HD rating: 150% of rated output current for 60 s ND rating: 120% of rated output current for 60 s (Derating may be required for applications that start and stop frequently) | ||||||||||||
Carrier frequency4 | 4 KHz (user adjustable up to 10 KHz. Derating may be required) | |||||||||||
400 Hz5 | ||||||||||||
Harmonics current distortion, THDI6 | ||||||||||||
Input power factor6 | ||||||||||||
Input current at HD7 | ||||||||||||||||||||
Input current at ND1 | ||||||||||||||||||||
Rated input capacity at HD8 | ||||||||||||||||||||
Rated input capacity at ND2 | ||||||||||||||||||||
Rated output current at HD9 | ||||||||||||||||||||
Rated output current at ND3 | ||||||||||||||||||||
HD rating: 150% of rated output current for 60 s ND rating: 120% of rated output current for 60 s (Derating may be required for applications that start and stop frequently) | ||||||||||||||||||||
Carrier frequency10 | 4 KHz (user adjustable up to 10 KHz. Derating may be required) | |||||||||||||||||||
400 Hz11 | ||||||||||||||||||||
Harmonics current distortion, THDI12 | ||||||||||||||||||||
Input power factor6 | ||||||||||||||||||||
![]() | ||||||||
IP20/Nema113 | ||||||||
IP20/Nema11 | ||||||||
1. Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring connections and power supply impedance.
3. The rated output current of the drive output amps should be equal to or greater than the motor rated current.
4. Carrier frequency is set to 4 KHz. Current derating is required in order to raise the carrier frequency.
6. If one of the following specifications are needed, the maximum output voltage will be the equivalent to the input voltage × 0.87: Harmonic current distortion of 5% or less, Harmonic suppression guidelines compliance or Input power factor of 0.98 or more.
7. Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring connections and power supply impedance.
9. The rated output current of the drive output amps should be equal to or greater than the motor rated current.
10. Carrier frequency is set to 4 KHz. Current derating is required in order to raise the carrier frequency.
1. Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring connections and power supply impedance.
3. The rated output current of the drive output amps should be equal to or greater than the motor rated current.
4. Carrier frequency is set to 4 KHz. Current derating is required in order to raise the carrier frequency.
6. If one of the following specifications are needed, the maximum output voltage will be the equivalent to the input voltage × 0.87: Harmonic current distortion of 5% or less, Harmonic suppression guidelines compliance or Input power factor of 0.98 or more.
7. Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring connections and power supply impedance.
9. The rated output current of the drive output amps should be equal to or greater than the motor rated current.
10. Carrier frequency is set to 4 KHz. Current derating is required in order to raise the carrier frequency.
Max. input current A1 | ||||||||||
IRMS current A2 | |||||||||
Heat loss W1 | |||||||||
20 | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. current A3 | ||||||||||||||||
Max. current A4 | |||||||||||