ZW

Связаться с отделом продаж

Сверхкомпактный, легкий датчик измеряет любые материалы

Конфокальный волоконно-оптический датчик перемещения ZW обеспечивает стабильное, бесконтактное линейное измерение высоты, толщины и других размеров. Он решает проблемы традиционных лазерных триангуляционных датчиков: отклонение для разных материалов и погрешность наклона. Компактная чувствительная головка не содержит электронных деталей, что устраняет проблемы пространства для установки и взаимных помех, электрического/магнитного шума, повышения температуры и механического позиционирования.

Минимальное разрешение: 0,01 мкм
Сверхкомпактная чувствительная головка: 24 x 24 мм; вес всего 105 г
Гибкий роботизированный кабель от датчика к контроллеру, развертывается на 32 м
Однократная установка чувствительной головки: нет необходимости перенастраивать при смене материалов
Отдельный усилитель обеспечивает светодиодный источник белого света, спектроскоп и процессор для преобразования отраженного окрашенного света в расстояние
ПО Smart Monitor ZW упрощает настройку и сбор/анализ данных

Ordering information

Sensor heads

Type	Measuring range	Spot diameter	Static resolution	Order code1
Straight type	7±0.3 mm	18 μm dia.	0.01 µm2/0.25 μm	ZW-S07
	20±1 mm	40 μm dia.	0.02 µm2/0.25 μm	ZW-S20
	30±3 mm	60 μm dia.	0.06 µm2/0.25 μm	ZW-S30
	40±6 mm	80 μm dia.	0.08 µm2/0.25 μm	ZW-S40
Right-angle type	7±0.3 mm	18 μm dia.	0.25 µm	ZW-SR07
	20±1 mm	40 μm dia.	0.25 µm	ZW-SR20
	40±6 mm	80 μm dia.	0.25 µm	ZW-SR40

Controller with EtherCAT

Power supply	Output type	Order code
24 VDC	NPN	ZW-CE10T/ZW-C103
24 VDC	PNP	ZW-CE15T/ZW-C151

Note: Controllers with binary outputs are also available (ZW-C10T/-C15T). Please contact your OMRON sales representative for details.

Cable

Item	Cable length	Order code
Sensor Head - Controller Extension Fiber Cable (flexible cable) (Fiber Adapter ZW-XFC provided)	2 m	ZW-XF02R
	5 m	ZW-XF05R
	10 m	ZW-XF10R
	20 m	ZW-XF20R
	30 m	ZW-XF30R
Fiber Adapter (between Sensor Head pre-wired cable and Extension Fiber Cable)	-	ZW-XFC
Parallel cable for ZW-CE1 ☐ 32-pole4	2 m	ZW-XCP2E
RS-232C Cable for personal computer	2 m	ZW-XRS2
RS-232C Cable for PLC/programmable terminal	2 m	ZW-XPT2

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product name	Specifications			Order code
Product name	Specifications	Number of licenses	Media	Order code
Sysmac Studio Standard Edition Ver.1. ☐☐ 5	The Sysmac Studio provides an integrated development environment to set up, program, debug, and maintain NJ-series controllers and other machine automation controllers, as well as EtherCAT slaves. Sysmac Studio runs on the following OS. Windows XP (Service Pack 3 or higher, 32-bit version)/Vista (32-bit version)/ 7 (32-bit/64-bit version) This software provides functions of the Measurement Sensor Edition. Refer to Sysmac Catalog (P072) for details such as supported models and functions.	- (Media only)	DVD	SYSMAC-SE200D
Sysmac Studio Standard Edition Ver.1. ☐☐ 5		1 license6	-	SYSMAC-SE201L
Sysmac Studio Measurement Sensor Edition Ver.1. ☐☐ 7	Sysmac Studio Measurement Sensor Edition is a limited license that provides selected functions required for ZW-series Displacement Sensor settings. Because this product is a license only, you need the Sysmac Standard Edition DVD media to install it.	1 license	-	SYSMAC-ME001L
Sysmac Studio Measurement Sensor Edition Ver.1. ☐☐ 7		3 licenses	-	SYSMAC-ME003L

Setting software

Item	Order code
Smart Monitor ZW	ZW-SW101

Accessories

Item	Order code
Fiber Connector Cleaner	ZW-XCL

Recommended EtherCAT communications cables

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.

Cable with connectors

Item	Recommended manufacturer	Cable length (m)8	Order code
Standard type Cable with connectors on both ends (RJ45/RJ45) Wire gauge and number of pairs: AWG27, 4-pair Cable Cable Sheath material: LSZH9 Cable color: Yellow 10	OMRON	0.3	XS6W-6LSZH8SS30CM-Y
		0.5	XS6W-6LSZH8SS50CM-Y
		1	XS6W-6LSZH8SS100CM-Y
		2	XS6W-6LSZH8SS200CM-Y
		3	XS6W-6LSZH8SS300CM-Y
		5	XS6W-6LSZH8SS500CM-Y
Rugged type Cable with connectors on both ends (RJ45/RJ45) Wire gauge and number of pairs: AWG22, 2-pair cable	OMRON	0.3	XS5W-T421-AMD-K
		0.5	XS5W-T421-BMD-K
		1	XS5W-T421-CMD-K
		2	XS5W-T421-DMD-K
		5	XS5W-T421-GMD-K
		10	XS5W-T421-JMD-K
Rugged type Cable with connectors on both ends (M12 Straight/RJ45) Wire gauge and number of pairs: AWG22, 2-pair cable	OMRON	0.3	XS5W-T421-AMC-K
		0.5	XS5W-T421-BMC-K
		1	XS5W-T421-CMC-K
		2	XS5W-T421-DMC-K
		5	XS5W-T421-GMC-K
		10	XS5W-T421-JMC-K
Rugged type Cable with connectors on both ends (M12 Right-angle/RJ45) Wire gauge and number of pairs: AWG22, 2-pair cable	OMRON	0.3	XS5W-T422-AMC-K
		0.5	XS5W-T422-BMC-K
		1	XS5W-T422-CMC-K
		2	XS5W-T422-DMC-K
		5	XS5W-T422-GMC-K
		10	XS5W-T422-JMC-K

Note: For details, refer to Cat.No.G019.

Cables/connectors

Wire gauge and number of pairs: AWG24, 4-pair cable

Item	Recommended manufacturer	Order code
Cables	Hitachi Cable, Ltd.	NETSTAR-C5E SAB 0.5 × 4P11
	Kuramo Electric Co.	KETH-SB1
	SWCC Showa Cable Systems Co.	FAE-50041
RJ45 connectors	Panduit Corporation	MPS588-C1

Wire gauge and number of pairs: AWG22, 2-pair cable

Item	Recommended manufacturer	Order code
Cables	Kuramo Electric Co.	KETH-PSB-OMR12
Cables	Nihon Electric Wire&Cable Co.,Ltd.	PNET/B1
RJ45 Assembly connector	OMRON	XS6G-T421-11

Note: Connect both ends of cable shielded wires to the connector hoods.

Industrial switching hubs for Ethernet

Number of ports	Failure detection	Current consumption	Order code
3	None	0.22 A	W4S1-03B
5	None	0.22 A	W4S1-05B
5	Supported	0.22 A	W4S1-05C

Note: Industrial switching hubs are cannot be used for EtherCAT.

EtherCAT junction slaves

Number of ports	Power supply voltage	Current consumption	Order code
3	20.4 to 28.8 VDC (24 VDC -15 to 20%)	0.08 A	GX-JC03
6	0.17 A	GX-JC06

Number of ports

Power supply voltage

Current consumption

Order code

20.4 to 28.8 VDC

(24 VDC -15 to 20%)

0.08 A

GX-JC03

0.17 A

GX-JC06

Note: 1 Please do not connect EtherCAT junction slave with OMRON position control unit, Model CJ1W-NC_81/_82.

2 EtherCAT junction slaves cannot be used for EtherNet/IP™ and Ethernet.

Specifications

Sensor head

Item		ZW-S07	ZW-S20	ZW-S30	ZW-S40	ZW-SR07	ZW-SR20	ZW-SR40
Measuring center distance		7 mm	20 mm	30 mm	40 mm	7 mm	20 mm	40 mm
Measuring range		± 0.3 mm	± 1 mm	± 3 mm	± 6 mm	± 0.3 mm	± 1 mm	± 6 mm
Static resolution 1		0.25 µm	0.25 µm	0.25 µm	0.25 µm	0.25 µm	0.25 µm	0.25 µm
Linearity 2		± 0.8 µm	± 1.2 µm	± 4.5 µm	± 7.0 µm	± 1.1 µm	± 1.6 µm	± 9.3 µm
Spot diameter 3	Near	20 µm dia.	45 µm dia.	70 µm dia.	90 µm dia.	20 µm dia.	45 µm dia.	90 µm dia.
	Center	18 µm dia.	40 µm dia.	60 µm dia.	80 µm dia	18 µm dia.	40 µm dia.	80 µm dia
	Far	20 µm dia.	45 µm dia.	70 µm dia.	90 µm dia	20 µm dia.	45 µm dia.	90 µm dia
Measuring cycle		500 µs to 10 ms
Operating ambient illumination		Illumination on object surface 10,000 lx or less: incandescent light
Ambient temperature range		Operating: 0 to 50 ° C, Storage: − 15 to 60 ° C (with no icing or condensation)
Ambient humidity range		Operating and storage: 35% to 85% (with no condensation)
Degree of protection		IP40 (IEC60529)
Vibration resistance (destructive)		10 to 150 Hz, 0.35 mm single amplitude, 80 min each in X, Y, and Z directions
Shock resistance (destructive)		150 m/s 2 3 times each in six directions (up/down, left/right, forward/backward)
Temperature characteristic 4		0.6 µm/ ° C (0.45 μm/°C)	1.5 µm/ ° C (1.0 μm/°C)	2.8 µm/ ° C (2.0 μm/°C)	4.8 µm/ ° C (3.8 μm/°C)	0.6 µm/ ° C (0.45 μm/°C)	1.5 µm/ ° C (1.0 μm/°C)	4.8 µm/ ° C (3.8 μm/°C)
Materials		Case: aluminum die-cast Fiber cable sheat: PVC Calibration ROM: PC
Fiber cable length		0.3 m, 2 m (Flex-resistant cable)
Fiber cable minimum bending radius		20 mm
Insulation resistance (Calibration ROM)		Between case and all terminals: 20 M Ω (by 250 V megger)
Dielectric strength (Calibration ROM)		Between case and all terminals: 1,000 VAC, 50/60 Hz, 1 min
Weight		Approx. 105 g (Chassis, fiber cable total)
Accessories included with sensor head		Instruction sheet, Fixing screw (M2) for Calibration ROM, Precautions for correct use

*1. Capacity value when Omron standard mirror surface target is measured at the measurement center distance as the average of 4,096 times.

*2. Material setting for the Omron standard mirror surface target: Error from an ideal straight line when measuring on mirror surface.
The reference values for linearity when targets to measure other than the above are as in the table below

Item	ZW-S07	ZW-S20	ZW-S30	ZW-S40	ZW-SR07	ZW-SR20	ZW-SR40
Glass	± 1.0 µm	± 1.2 µm	± 4.5 µm	± 7.0 µm	± 1.1 µm	± 1.6 µm	± 9.3 µm
SUS BA	± 1.2 µm	± 1.4 µm	± 5.5 µm	± 8.5 µm	± 1.2 µm	± 1.8 µm	± 9.3 µm
White ceramic	± 1.6 µm	± 1.7 µm	± 6.4 µm	± 9.5 µm	± 1.6 µm	± 1.9 µm	± 11.0 µm

*3. Capacity value defined by 1/e² (13.5%) of the center optical intensity in the measured area.

*4. Temperature characteristic at the measurement center distance when the sensor head and the target are fastened with an aluminum jig and the sensor head and the controller are set in the same temperature environment.
Figures in parentheses are converted value obtained by subtracting the effect of expansion or contraction of the aluminum jig itself.

Automation software Sysmac Studio

System requirements

Item	Condition
Operating system (OS)13,14	Windows XP (Service Pack 3 or higher, 32-bit version)/Vista(32-bit version)/7(32-bit/64-bit version)
CPU	Windows computers with Celeron 540 (1.8 GHz) or faster CPU. Core i5 M520 (2.4 GHz) or equivalent or faster recommended
Main memory	2 GB min.
Recommended video memory/video card for using 3D motion trace	Video memory: 512 MB min. Video card: Either of the following video cards: • NVIDIA GeForce 200 Series or higher • ATI RadeonHD5000 Series or higher
Hard disk	At least 1.6 GB of available space
Display	XGA 1024 × 768, 16 million colors. WXGA 1280 × 800 min. recommended
Disk drive	DVD-ROM drive
Communication ports	USB port corresponded to USB 2.0, or Ethernet port15
Supported languages	Japanese, English, German, French, Italian, Spanish, simplified Chinese, traditional Chinese, Korean

Setting software Smart Monitor ZW ZW-SW101

System requirements

Item	Condition
Operating System(OS)	Windows 7 (32 or 64-bit version) Windows XP (Service Pack3 or more, 32-bit version)
CPU	Intel Pentium III, 850 MHz or more (2 GHz or more is recommended.)
Main memory	1 GB or more
Hard disk	50 MB or more
Display	1024 × 768 dots or more, 16 million colors or more
Supported languages	Japanese/English
Communication port	Ethernet port

Controller

Item				ZW-CE10T	ZW-CE15T
Input/Output type				NPN	PNP
Number of connected sensor heads				1 per Controller
Sensor head compatibility				Available
Light source for measurement				White LED
Segment display	Main display			11-segment red display, 6 digits
Segment display	Sub-display			11-segment green display, 6 digits
LED display	Status indicators			HIGH (orange), PASS (green), LOW (orange), STABILITY (green), ZERO (green), ENABLE (green), THRESHOLD-H (orange), THRESHOLD-L (orange), RUN (green)
LED display	EtherCAT indicators			L/A IN (Link Activity IN) (green), L/O OUT (Link Activity OUT) (green), ECAT RUN (green), ECAT ERR (red)
External interface	Ethernet			100BASE-TX, 10BASE-T, No-protocol communications (TCP/UDP), EtherNet/IPTM
	EtherCAT			EtherCAT-specific protocol 100BASE-TX
	RS-232C			115,200 bps max.
	Analog output terminal block	Analog voltage output (OUT1V)		-10 to 10 V, output impedance: 100 Ω
	Analog output terminal block	Analog current output (OUT1A)		4 to 20 mA, maximum load resistance: 300 Ω
	32-pole extension connector	Judgment output (HIGH1/PASS1/LOW1)		Transistor output system Output voltage: 21.6 to 30 VDC Load current: 50 mA or less Residual voltage when turning ON: 1.2 V or less Leakage voltage when turning OFF: 0.1 mA or les
		BUSY output (BUSY1)
		ALARM output (ALARM1)
		ENABLE output (ENABLE)
		LED OFF input (LED OFF1)		DC input system Input voltage: 24 VDC -10% (21.6 to 26.4 VDC) Input current: 7 mA Typ. (24 VDC) Voltage/Current when turning ON: 19 V/3 mA or more Voltage/Current when turning OFF: 5 V/1 mA or less
		ZERO RESET input (ZERO)
		TIMING output (TIMING1)
		RESET output (RESET1)
		Bank	Selected bank output (BANK_OUT 1 to 3)	Transistor output system Output voltage: 21.6 to 30 VDC Load current: 50 mA or less Residual voltage when turning ON: 1.2 V or less Leakage voltage when turning OFF: 0.1 mA or less
		Bank	Selected bank input (BANK_SEL 1 to 3)	DC input system Input voltage: 21.6 to 26 VDC Input current: 7 mA Typ. (24 VDC) Voltage/Current when turning ON: 19 V/3 mA or more Voltage/Current when turning OFF: 5 V/1 mA or less
Main functions	Exposure time			Auto/Manual
	Measuring cycle			500 µs to 10 ms
	Material setting			Standard/Mirror/Diffusion surfaces
	Measurement Item			Height/Thickness/Calculation
	Filtering			Median/Average/Differentiation/High pass/Low pass/Band pass
	Outputs			Scaling/Different holds/Zero reset/Logging for a measured value
	Display			Measured value/Threshold value/Analog output voltage or current value/Judgment result/Resolution/Exposure time
	Number of configurable banks			Max. 8 banks
	Task process			Multi-task (up to 4 tasks per bank)
	System			Save/Initialization/Display measurement information/Communication settings/Sensor Head calibration/Key-lock/ Trigger-key input
Ratings	Power supply voltage			21.6 to 26.4 VDC (including ripple)
	Current consumption			600 mA max.
	Insulation resistance			Across all lead wires and controller case: 20 MΩ (by 250 V megger)
	Dialectic strength			Across all lead wires and controller case: 1,000 VAC, 50/60 Hz, 1 min.
Environmental	Degree of protection			IP20 (IEC60529)
	Vibration resistance (destructive)			10 to 55 Hz, 0.35-mm single amplitude, 50 min each in X, Y, and Z directions
	Shock resistance (destructive)			150 m/s2, 3 times each in six directions (up/down, left/right, forward/backward)
	Ambient temperature			Operating: 0 to 40°C Storage: -15 to 60°C (with no icing or condensation)
	Ambient humidity			Operating and storage: 35% to 85% (with no condensation)
Grounding				D-type grounding (Grounding resistance of 100 Ω or less) Note: For conventional Class D grounding
Materials				Case: PC
Weight				Approx. 750 g (main unit only), approx. 150 g (Parallel cable)
Accessories included with controller				Instruction sheet, Member registration sheet, Parallel cable ZW-XCP2E

Note: Controllers with binary outputs are also available (ZW-C10T/-C15T). Please contact your OMRON sales representative for details.

ZW series EtherCAT communications specifications

Item	Specification
Communications standard	IEC61158 Type12
Physical layer	100BASE-TX (IEEE802.3)
Connectors	RJ45 × 2 ECAT IN: EtherCAT input ECAT OUT: EtherCAT output
Communications media	Category 5 or higher (cable with double, aluminum tape and braided shielding) is recommended.
Communications distance	Distance between nodes: 100 m max.
Process data	Variable PDO mapping
Mailbox (CoE)	Emergency messages, SDO requests, SDO responses, and SDO information
Distributed clock	Synchronization in DC mode.
LED display	L/A IN (Link/Activity IN) × 1, AL/A OUT (Link/Activity OUT) × 1, AECAT RUN × 1, AECAT ERR × 1

1. When ordering, specify the cable length (0.3 m, 2.0 m).

2. The high resolution types are subject to the export control restrictions

3. The high resolution types are subject to the export control restrictions

4. A parallel cable for Controllers with binary outputs is also available (ZW-XCP2). Please contact your OMRON sales representative for details.

5. ZW-series is supported by Sysmac Studio version 1.05 or higher.

6. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).

7. Setting Software Smart Monitor ZW is also available (ZW-SW101). Please contact your OMRON representative for details.

8. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20m are available.
Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available.

9. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.

10. Cables colors are available in blue, yellow, or Green

11. We recommend you to use above cable and connector together.

12. We recommend you to use above cable and connector together.

13. Sysmac Studio operating system precaution: System requirements and hard disk space may vary with the system environment.

14. The following restrictions apply when Sysmac Studio is used with Microsoft Windows Vista or Windows 7.
Some Help files cannot be accessed.
The Help files can be accessed if the Help program distributed by Microsoft for Windows (WinHlp32.exe) is installed. Refer to the Microsoft homepage listed below or contact Microsoft for details on installing the file. (The download page is automatically displayed if the Help files are opened while the user is connected to the Internet.)
http://support.microsoft.com/kb/917607/en-us

15. Refer to the hardware manual for your Controller for hardware connection methods and cables to connect the computer and Controller.