D40ML

Связаться с отделом продаж

Магнитные блокирующие выключатели безопасности с RFID

Магнитный замок в сочетании с RFID обеспечивает высокую силу запирания и устойчивость к манипуляциям

RFID обеспечивает высокую степень защиты от манипуляций
Гигиеничный дизайн — исполнения из нержавеющей стали имеют степень защиты IP69K
Удобная диагностика неисправностей с помощью светодиодов
Последовательное соединение до 20 выключателей
Ответные части с общим и уникальным кодированием типа 4
Два размера выключателей с различными силами запирания
Три типа корпуса: пластиковый, литой металлический, из нержавеющей стали марки 316
Уровень безопасности до PLe (в соответствии с ISO 13849-1)

Ordering information

Switches

Case material	Holding force F1_max (typical)	Actuator type	Cable configuration	Order code
316 Stainless Steel (IP69K)	600 N	Unique	5 m Cable	D40ML-SS2-U-5M
			10 m Cable	D40ML-SS2-U-10M
			Pigtail w/ M12 Connector	D40ML-SS2-U-M12
		Basic	5 m Cable	D40ML-SS2-B-5M
			10 m Cable	D40ML-SS2-B-10M
			Pigtail w/ M12 Connector	D40ML-SS2-B-M12
	950 N	Unique	5 m Cable	D40ML-SS1-U-5M
			10 m Cable	D40ML-SS1-U-10M
			Pigtail w/ M12 Connector	D40ML-SS1-U-M12
		Basic	5 m Cable	D40ML-SS1-B-5M
			10 m Cable	D40ML-SS1-B-10M
			Pigtail w/ M12 Connector	D40ML-SS1-B-M12
Plastic (IP67)	900 N	Unique	5 m Cable	D40ML-P2-U-5M
			10 m Cable	D40ML-P2-U-10M
			Pigtail w/ M12 Connector	D40ML-P2-U-M12
		Basic	5 m Cable	D40ML-P2-B-5M
			10 m Cable	D40ML-P2-B-10M
			Pigtail w/ M12 Connector	D40ML-P2-B-M12
	1500 N	Unique	5 m Cable	D40ML-P1-U-5M
			10 m Cable	D40ML-P1-U-10M
			Pigtail w/ M12 Connector	D40ML-P1-U-M12
		Basic	5 m Cable	D40ML-P1-B-5M
			10 m Cable	D40ML-P1-B-10M
			Pigtail w/ M12 Connector	D40ML-P1-B-M12
Diecast Metal (IP67)	900 N	Unique	5 m Cable	D40ML-M2-U-5M
			10 m Cable	D40ML-M2-U-M12
			Pigtail w/ M12 Connector	D40ML-M2-U-M12
		Basic	5 m Cable	D40ML-M2-B-5M
			10 m Cable	D40ML-M2-B-10M
			Pigtail w/ M12 Connector	D40ML-M2-B-M12
	1500 N	Unique	5 m Cable	D40ML-M1-U-5M
			10 m Cable	D40ML-M1-U-10M
			Pigtail w/ M12 Connector	D40ML-M1-U-M12
		Basic	5 m Cable	D40ML-M1-B-5M
			10 m Cable	D40ML-M1-B-10M
			Pigtail w/ M12 Connector	D40ML-M1-B-M12

Spare Actuators

Product Description	Order code
Stainless Steel; IP69K; 950 N; Basic Code; Actuator	D40ML-SS1-B-ACT
Stainless Steel; IP69K 600 N; Basic Code; Actuator	D40ML-SS2-B-ACT
Diecast Metal; IP67; 1500 N; Basic Code; Actuator	D40ML-M1-B-ACT
Diecast Metal; IP67; 900 N; Basic Code; Actuator	D40ML-M2-B-ACT
Plastic; IP67; 1500 N; Basic Code; Actuator	D40ML-P1-B-ACT
Plastic; IP67; 900 N; Basic Code; Actuator	D40ML-P2-B-ACT

Note: Spare actuators are not available for uniquely coded switches.

Accessories

Product Description	Order code
Quick Disconnect Cable, 8-pin M12 to Flying Leads, PVC Jacket, 5 Meter Length	D40ML-CBL-M12-5M
Quick Disconnect Cable, 8-pin M12 to Flying Leads, PVC Jacket, 10 Meter Length	D40ML-CBL-M12-10M

Note 1. The quick disconnect cable has an identical cable pining as the switch wiring.
2. Y92E-M12PURSH8S M-L disconnect cables are also compatible with D40ML.

Specifications

Codes and Standards		IEC 60947-5-3:2013, EN 60947-5-1:2004 + AC:2005 + A1:2009, EN 60947-1:2007 + A1:2011, EN ISO 13849-1:2008 + AC:2009, EN 62061:2005 + AC:2010 + A1:2013, ISO 14119:2013, UL508
Safety Classification and Reliability Data	Minimum Switched Current	10 VDC 1 mA
	Dielectric Withstand	250 VAC
	Insulation Resistance	100 M Ω
	Shock Resistance	11 ms 30G
	Vibration Resistance	10 to 55 Hz, 1 mm amplitude
	Switching Distance	S_ao 1 mm Close; S_ar 10 mm Open
	Misalignment	Between switch and actuator, 2 mm in any direction
	Switching Frequency	1.0 Hz maximum
	Response Time (On –> Off)	10 ms max.
	Operating Time (Off –> On)	150 ms
	Approach Speed	200 to 1000 mm/s
	Body Material	D40ML-P_: Plastic D40ML-M_: Diecast Metal D40ML-SS_: 316 Stainless Steel Actuator Seal: Silicone Encapsulation: High Temperature Epoxy
	Operating Temperature Range	–25 to 40°C
	Ambient Operating Humidity	up to 90% at 25 ~ 40°C
	Enclosure Protection	IP67 (Plastic or Diecast Metal) IP69K (Stainless steel versions with flying leads)
	Cable Type	PVC 8 core, 6 mm outer diameter
	Mounting Bolts	2 × M5 Tightening torque 1.0 Nm
	Mounting Position	Any
	Power Supply	24 VDC ±10% (selv / pelv)
	Power Consumption	Unlocked: 50 mA max. Locked: Medium Duty 325 mA max. Heavy Duty 500 mA max.
	Holding Force	Medium Duty Stainless Steel: F1_max (typical) 600 N, F_zh 1 450 N Plastic and Diecast: F1_max (typical) 900 N, F_zh 675 N Heavy Duty Stainless Steel: F1_max (typical) 950 N, F_zh 700 N Plastic and Diecast: F1_max (typical) 1500 N, F_zh 1150 N
	Max. Switched Current (Outputs)	200 mA (min. internal resistance 8.5 Ohms)
	Auxiliary Signal	+24 VDC (Door Open)
Characteristic Data according to EN ISO13849-1		PLe: If both channels are used in combination with a SIL3/PLe control device Category: Cat. 4 MTTFd: 1100a Diagnostic Coverage DC: 99% (high) Number of operating days per year: d_op = 365d Number of operating hours per day: h_op = 24h B10d: Not mechanical parts implemented
Characteristic Data according to IEC62061 (used as a sub system)		Safety Integrity Level: SIL3 PFH (1/h): 4.77E-10 Corresponds to 4.8% of SIL3 PFD: 4.18E-05 Corresponds to 4.2% of SIL3 Proof Test Interval T₁ : 20a
Information with regard to UL508		Use LVLC or Class 2 supply. Type 1 enclosure.
Risk Time in accordance with EN 60947-5-3		150 ms (switching off delay at removal of actuator)

Note: When the product use deviates from these assumptions (different load, operating frequency, etc.) the values must be adjusted accordingly.

1. A new test has been introduced with the coefficient 1.3. A device with a specified maximum holding force (F_zh ) of 500 N needs to hold up a force test (F1_max ) at 650 N.
According to the standard the locking force F_zh should be stated for every guard locking switch.