E2EQ-IL

Связаться с отделом продаж

Устойчивые к брызгам от сварки индуктивные датчики с интерфейсом IO-Link — инновационное решение для решения проблем на промышленных производственных объектах.

Устойчивые к брызгам от сварки индуктивные датчики с интерфейсом IO-Link — инновационное решение для решения проблем на промышленных производственных объектах.

Сокращение простоев оборудования благодаря встроенным функциям диагностики
Предотвращение случайных отказов из-за слишком близкого или далекого расположения объектов
Упрощение обслуживания за счет идентификации каждого датчика по сети IO-Link
Сокращение номенклатуры применяемых моделей датчиков благодаря возможности программирования датчика
Оболочка из фторкаучука обеспечивает исключительную стойкость к брызгам металла при сварочных работах в автомобилестроении и металлообработке

Ordering information

DC 3-wire IO-Link models

	Sensing distance	Connection method	Cable specifications	Operation mode	Pin arrangement	Baud rate	Order code
M12	3 mm	Pre-wired models (2 m)	PVC	NO/NC switching	−	COM2	E2EQ-X3B4-IL2 2M
		Pre-wired models (2 m)			−	COM3	E2EQ-X3B4-IL3 2M
		M12 Pre-wired Smartclick connector models (0.3 m)			1: +V 3: 0 V 4: C/Q output	COM2	E2EQ-X3B4-M1TJ-IL2 0.3M
		M12 Pre-wired Smartclick connector models (0.3 m)			1: +V 3: 0 V 4: C/Q output	COM3	E2EQ-X3B4-M1TJ-IL3 0.3M
M18	7 mm	Pre-wired models (2 m)			−	COM2	E2EQ-X7B4-IL2 2M
		Pre-wired models (2 m)			−	COM3	E2EQ-X7B4-IL3 2M
		M12 Pre-wired Smartclick connector models (0.3 m)			1: +V 3: 0 V 4: C/Q output	COM2	E2EQ-X7B4-M1TJ-IL2 0.3M
		M12 Pre-wired Smartclick connector models (0.3 m)			1: +V 3: 0 V 4: C/Q output	COM3	E2EQ-X7B4-M1TJ-IL3 0.3M
M30	10 mm	Pre-wired models (2 m)			−	COM2	E2EQ-X10B4-IL2 2M
		Pre-wired models (2 m)			−	COM3	E2EQ-X10B4-IL3 2M
		M12 Pre-wired Smartclick connector models (0.3 m)			1: +V 3: 0 V 4: C/Q output	COM2	E2EQ-X10B4-M1TJ-IL2 0.3M
		M12 Pre-wired Smartclick connector models (0.3 m)			1: +V 3: 0 V 4: C/Q output	COM3	E2EQ-X10B4-M1TJ-IL3 0.3M

Specifications

DC 3-wire IO-Link models

Size		M12	M18	M30
Item	Model	E2EQ-X3B4-IL_	E2EQ-X7B4-IL_	E2EQ-X10B4-IL_
Sensing distance		3 mm ±10%	7 mm ±10%	10 mm ±10%
Set distance1		0 to 2.4 mm	0 to 5.6 mm	0 to 8 mm
Differential travel		10% max. of sensing distance
Response frequency2		1 kHz	0.5 kHz	0.4 kHz
Power supply voltage		10 to 30 VDC (including 10% ripple (p-p))
Current consumption		20 mA max.
Control output	Load current	100 mA max.
Control output	Residual voltage	2 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators1		In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit) In the IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Operation mode		PNP NO/NC switching type (Factory setting: NO)
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m)
Materials	Case	Fluororesin coating (Base material: brass)
	Sensing surface	Fluororesin
	Clamping nuts	Fluororesin coating (Base material: brass)
	Toothed washer	Zinc-plated iron
Main IO-Link functions		Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, and initial reset
Communication specifications	IO-Link specification	Ver 1.1
	Baud rate	-IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps)
	Data length	PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
	Minimum cycle time	-IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms

1. In the Standard I/O mode (SIO mode), use the product in a range that the green stability indication lamp is lit. (Although the lamp is turned off when the object detected has approached excessively, the detection performance is stable.)
In the IO-Link mode, use the product in a range that the Byte1_bit4 for instability detection is zero. (Although the Byte1_bit5 for excessive proximity detection is one if the object detected has approached excessively, the detection performance is stable.) Please contact your OMRON sales representative regarding assignment of data.

2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.