E2EQ NEXT

Связаться с отделом продаж

Бесконтактный датчик E2EQ NEXT

Большая дистанция срабатывания предотвращает непредвиденные остановки оборудования

Покрытие, устойчивое к брызгам, для применения на участках сварки
Почти вдвое большая дистанция срабатывания, чем у предыдущих моделей
Индикатор с углом обзора 360° оснащен светодиодом высокой яркости.
Всего 10 секунд требуется для замены бесконтактного датчика благодаря монтажному кронштейну "e-jig".
Кабели с повышенной маслостойкостью.

Ordering information

Sensors

Spatter-resistant Long-distance type/DC 2-wire

Appearance		Sensing distance	Connection method	Cable specifications	Polarity	Order code
Appearance		Sensing distance	Connection method	Cable specifications	Polarity	Operation mode: NO	Operation mode: NC
Shielded	M8	3 mm	Pre-wired Models (2 m)1	Vinyl chloride (PVC) (oil-resistant reinforced)	Yes	E2EQ-X3D18 2M	E2EQ-X3D28 2M
			Pre-wired Models (2 m)1		No	E2EQ-X3D18-T 2M	E2EQ-X3D28-T 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		Yes	E2EQ-X3D18-M1TGJ 0.3M	E2EQ-X3D28-M1TGJ 0.3M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		No	E2EQ-X3D18-M1TGJ-T 0.3M	E2EQ-X3D28-M1TGJ-T 0.3M
	M12	7 mm	Pre-wired Models (2 m)1		Yes	E2EQ-X7D112 2M	E2EQ-X7D212 2M
			Pre-wired Models (2 m)1		No	E2EQ-X7D112-T 2M	E2EQ-X7D212-T 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		Yes	E2EQ-X7D112-M1TGJ 0.3M	E2EQ-X7D212-M1TGJ 0.3M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		No	E2EQ-X7D112-M1TGJ-T 0.3M	E2EQ-X7D212-M1TGJ-T 0.3M
	M18	11 mm	Pre-wired Models (2 m)1		Yes	E2EQ-X11D118 2M	E2EQ-X11D218 2M
			Pre-wired Models (2 m)1		No	E2EQ-X11D118-T 2M	E2EQ-X11D218-T 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		Yes	E2EQ-X11D118-M1TGJ 0.3M	E2EQ-X11D218-M1TGJ 0.3M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		No	E2EQ-X11D118-M1TGJ-T 0.3M	E2EQ-X11D218-M1TGJ-T 0.3M
	M30	20 mm	Pre-wired Models (2 m)1		Yes	E2EQ-X20D130 2M	E2EQ-X20D230 2M
			Pre-wired Models (2 m)1		No	E2EQ-X20D130-T 2M	E2EQ-X20D230-T 2M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		Yes	E2EQ-X20D130-M1TGJ 0.3M	E2EQ-X20D230-M1TGJ 0.3M
			M12 Pre-wired Smartclick Connector Models (0.3 m)		No	E2EQ-X20D130-M1TGJ-T 0.3M	E2EQ-X20D230-M1TGJ-T 0.3M

Accessories

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Pre-wired Connectors) A Sensor I/O Connector is not provided with the Sensor. It must be ordered separately as required.

Appearance		Cable diameter (mm)	Cable length	Applicable Proximity Sensor model number	Order code
M12 Straight, Smartclick Connectors	Sockets on One Cable End	6 dia.	1 m	E2E-X ⬜ D ⬜ -M1TGJ(-T) E2EQ-X ⬜ D ⬜ -M1TGJ(-T)	XS5F-D421-C80-F
			2 m		XS5F-D421-D80-F
			3 m		XS5F-D421-E80-F
			5 m		XS5F-D421-G80-F
			10 m		XS5F-D421-J80-F
	Socket and Plug on Cable Ends		1 m		XS5W-D421-C81-F
			2 m		XS5W-D421-D81-F
			3 m		XS5W-D421-E81-F
			5 m		XS5W-D421-G81-F
			10 m		XS5W-D421-J81-F

e-jig (Mounting Sleeves)

A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required.

Applicable Sensors	Quantity	Order code
E2E NEXT M8 Shielded Sensors	1	Y92E-J8S12
E2E NEXT M12 Shielded Sensors	1	Y92E-J12S18
E2E NEXT M18 Shielded Sensors	1	Y92E-J18S30

Note: Mounting Brackets are not Spatter-resistant Models.

Specifications

Spatter-resistant Long-distance type/DC 2-wire

	Size	M8	M12	M18	M30
	Shielded	Shielded
Item	Model	E2EQ-X3D ⬜	E2EQ-X7D ⬜	E2EQ-X11D ⬜	E2EQ-X20D ⬜
Sensing distance		3 mm ±10%	7 mm ±10%	11 mm ±10%	20 mm ±10%
Setting distance2		0 to 2.4 mm	0 to 5.6 mm	0 to 8.8 mm	0 to 16 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object		Iron, 9 × 9 × 1 mm	Iron, 21 × 21 × 1 mm	Iron, 33 × 33 × 1 mm	Iron, 60 × 60 × 1 mm
Response frequency3		1,000 Hz	800 Hz	500 Hz	200 Hz
Power supply voltage		10 to 30 VDC, (including 10% ripple (p-p))
Leakage current		0.8 mA max.
Control output	Load current	3 to 100 mA
Control output	Residual voltage	Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m) No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)
Indicator		D1 Models: Operation indicator (orange), Setting indicator (green) D2 Models: Operation indicator (orange)
Operation mode		D1 Models: NO D2 Models: NC
Protection circuits		Surge suppressor, Load short-circuit protection
Ambient temperature range		Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range		Operating and Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C		±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s² 10 times each in X, Y, and Z directions	1,000 m/s² 10 times each in X, Y, and Z directions
Degree of protection		Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529) and IP67G4 (JIS C 0920 Annex 1)
Connecting method		Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard cable length: 0.3 m)
Weight (packed state)	Pre-wired Models	Approx. 60 g	Approx. 70 g	Approx. 150 g	Approx. 210 g
Weight (packed state)	Pre-wired Connector Models	Approx. 30 g	Approx. 40 g	Approx. 90 g	Approx. 140 g
Materials	Case	Fluororesin coating (Base material: brass)
	Sensing surface	Fluororesin
	Clamping nuts	Fluororesin coating (Base material: brass)
	Toothed washer	Zinc-plated iron
	Cable	Vinyl chloride (PVC)
Accessories		Instruction manual, Clamping nuts, Toothed washer

Accessories (Sold Separately)

Sensor I/O Connectors

Rated current	4 A
Rated voltage	250 VDC
Contact resistance (connector)	40 mΩ max. (20 mV max., 100 mA max.)
Insulation resistance	1,000 MΩ min. (at 500 VDC)
Dielectric strength (connector)	1,500 VAC for 1 min (leakage current: 1 mA max.)
Degree of protection	IP67 (IEC60529)
Insertion tolerance	50 times min.
Lock strength	Tensile: 100 N/15 s, Torsion: 1 N·m/15 s
Cable holding strength	Tensile: 100 N/15 s, Torsion: 1 N·m/15 s (for cable diameter of 6 mm)
Lock operating force	0.1 to 0.25 N·m
Ambient operating temperature range	−25 to 70°C
Ambient humidity range	20% to 85%
Number of pressure-weld repairs	10 times max. (Limited to the same external diameter and wire diameter.)

1. Models with 5-m cable length are also available with "5M" suffix. (Example: E2EQ-X3D18 5M)

2. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).

3. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

4. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.

1. Models with 5-m cable length are also available with "5M" suffix. (Example: E2EQ-X3D18 5M)

2. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).