E3JK

Связаться с отделом продаж

Фотоэлектрический датчик с большим расстоянием срабатывания для любого напряжения питания

Новое поколение датчиков серии E3JK в прямоугольном корпусе отличается значительно улучшенными характеристиками измерения и исключительным удобством эксплуатации. В серию входят модели на напряжение питания от 24 до 240 В переменного тока и модели с транзисторными выходами PNP- и NPN-типа.

Все модели имеют мощный светодиод с хорошо видимым лучом красного цвета, обеспечивающий простую центровку и большое расстояние срабатыванияЯркие светодиодные индикаторы видны даже на большом расстоянииЛучшее соотношение цены и качестваДоступны модели с красным и инфракрасным светодиодом

Multi-voltage power supply

Multi-voltage power-supply fits for building installations like industrial doors, elevators or car parks.

Long sensing distance

Red high-power LED in all models for easy alignment and long sensing distance.

Ordering information

Sensor type	LED	Sensing distance	Connection method				Order code
Sensor type	LED	Sensing distance					Relay models (AC/DC)	NPN models	PNP models
Through-beam1	Red light	40 m	-	-	2 m	-	E3JK-TR11 2M	E3JK-TN11 2M	E3JK-TP11 2M
	Red light	5 m					E3JK-TR12 2M	E3JK-TN12 2M	E3JK-TP12 2M
	Infrared light	40 m					E3JK-TR13 2M	E3JK-TN13 2M	E3JK-TP13 2M
	Infrared light	5 m					E3JK-TR14 2M	E3JK-TN14 2M	E3JK-TP14 2M
Retro-reflective without M.S.R.2	Red light	7 m3 [100 mm]4 11 m5 [100 mm]4					E3JK-RR11 2M	E3JK-RN11 2M	E3JK-RP11 2M
Retro-reflective without M.S.R.2	Infrared light	7 m3 [100 mm]4 11 m5 [100 mm]4					E3JK-RR13 2M	E3JK-RN13 2M	E3JK-RP13 2M
Retro-reflective with M.S.R.2	Red light	6 m3 [100 mm]4 10 m5 [100 mm]4					E3JK-RR12 2M	E3JK-RN12 2M	E3JK-RP12 2M
Diffuse-reflective	Red light	2.5 m					E3JK-DR11 2M	E3JK-DN11 2M	E3JK-DP11 2M
	Red light	300 mm					E3JK-DR12 2M	E3JK-DN12 2M	E3JK-DP12 2M
	Infrared light	2.5 m					E3JK-DR13 2M	E3JK-DN13 2M	E3JK-DP13 2M
	Infrared light	300 mm					E3JK-DR14 2M	E3JK-DN14 2M	E3JK-DP14 2M

Note: Sensors with brackets and reflectors are available (The model numbers contain (“-C.”).

Accessories

Appearance	Description	Order code
	Mounting bracket6 (A mounting bracket is not provided with the sensor. Order a mounting bracket separately if required.)	E39-L40

Specifications

Through-beam

Item		Through-beam
Item		E3JK-TR11-_	E3JK-TR12-_	E3JK-TR13-_	E3JK-TR14-_
Sensing distance		40 m	5 m	40 m	5 m
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		24 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz
Control output		Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1), 5 VDC, 10 mA min., Light-ON/Dark-ON selectable
Response time		20 ms max.
Sensitivity adjustment		One-turn adjuster Receiver (E3JK-TR1_-D) only
Ambient temperature range	Operating	−25°C to 55°C (with no icing or condensation)
Ambient temperature range	Storage	−40°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP64
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
Material	Lens	Methacrylic resin

Item		Through-beam
	NPN output	E3JK-TN11	E3JK-TN12	E3JK-TN13	E3JK-TN14
	PNP output	E3JK-TP11	E3JK-TP12	E3JK-TP13	E3JK-TP14
Sensing distance		40 m	5 m	40 m	5 m
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		10 to 30 VDC, including ripple (p-p): 10%
Control output		Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable
Response time		1 ms max.
Sensitivity adjustment		One-turn adjuster Receiver (E3JK-T___-D) only
Ambient temperature range	Operating	−25°C to 55°C (with no icing or condensation)
Ambient temperature range	Storage	−40°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP64
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
Material	Lens/Display window	Methacrylic resin

Retro-reflective

Item		Retro-reflective (without MSR function)		Retro-reflective (with MSR function)
Item		E3JK-RR11-_	E3JK-RR13-_	E3JK-RR12-_
Sensing distance		7 m [100 mm]7 (When using E39-R1), 11 m [100 mm]1 (When using E39-R2)		6 m [100 mm]1 (When using E39-R1), 10 m [100 mm]1 (When using E39-R2)
Light source (wavelength)		Red LED (624 nm)	Infrared LED (850 nm)	Red LED (624 nm)
Power supply voltage		24 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz
Control output		Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1), 5 VDC, 10 mA min., Light-ON/Dark-ON selectable
Response time		20 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient temperature range	Operating	−25°C to 55°C (with no icing or condensation)
Ambient temperature range	Storage	−40°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP64
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
Material	Lens/Display window	Methacrylic resin

Item		Retro-reflective (without MSR function)		Retro-reflective (with MSR function)
	NPN output	E3JK-RN11	E3JK-RN13	E3JK-RN12
	PNP output	E3JK-RP11	E3JK-RP13	E3JK-RP12
Sensing distance		7 m [100 mm]8 (When using E39-R1), 11 m [100 mm]1 (When using E39-R2)		6 m [100 mm]1 (When using E39-R1), 10 m [100 mm]1 (When using E39-R2)
Light source (wavelength)		Red LED (624 nm)	Infrared LED (850 nm)	Red LED (624 nm)
Power supply voltage		10 to 30 VDC, including ripple (p-p): 10%
Control output		Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable
Response time		1 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient temperature range	Operating	−25°C to 55°C (with no icing or condensation)
Ambient temperature range	Storage	−40°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP64
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
Material	Lens/Display window	Methacrylic resin

Diffuse-reflective

Item		Diffuse-reflective
Item		E3JK-DR11-_	E3JK-DR12-_	E3JK-DR13-_	E3JK-DR14-_
Sensing distance		White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm	White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		24 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz
Control output		Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1), 5 VDC, 10 mA min., Light-ON/Dark-ON selectable
Response time		20 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient temperature range	Operating	−25°C to 55°C (with no icing or condensation)
Ambient temperature range	Storage	−40°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP64
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
Material	Lens/Display window	Methacrylic resin

Item		Diffuse-reflective
	NPN output	E3JK-DN11	E3JK-DN12	E3JK-DN13	E3JK-DN14
	PNP output	E3JK-DP11	E3JK-DP12	E3JK-DP13	E3JK-DP14
Sensing distance		White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm	White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		10 to 30 VDC, including ripple (p-p): 10%
Control output		Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable
Response time		1 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient temperature range	Operating	−25°C to 55°C (with no icing or condensation)
Ambient temperature range	Storage	−40°C to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP64
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
Material	Lens/Display window	Methacrylic resin

1. Through-beam sensors are sold in sets that include both the emitter and receiver.

2. A reflector is not included. Purchase a reflector separately to match the intended use of the sensor.

3. Measured with E39-R1. Please order reflector separately.

4. Values in parentheses indicate the minimum required distances between the sensors and reflectors.

5. Measured with E39-R2. Please order reflector separately.

6. When using a through-beam sensor, order one mounting bracket for the receiver and one for the emitter.

7. Values in parentheses indicate the minimum required distances between the sensors and reflectors.

8. Values in parentheses indicate the minimum required distances between the sensors and reflectors.

1. Through-beam sensors are sold in sets that include both the emitter and receiver.

2. A reflector is not included. Purchase a reflector separately to match the intended use of the sensor.

3. Measured with E39-R1. Please order reflector separately.

4. Values in parentheses indicate the minimum required distances between the sensors and reflectors.

5. Measured with E39-R2. Please order reflector separately.

6. When using a through-beam sensor, order one mounting bracket for the receiver and one for the emitter.

7. Values in parentheses indicate the minimum required distances between the sensors and reflectors.

8. Values in parentheses indicate the minimum required distances between the sensors and reflectors.

Mounting brackets

Type	Material	Features	Order code
M8 nuts	brass	100 pcs	ASMM0800
M8 nuts	stainless steel		ASMM0801
M12 nuts	brass		ASMM1200
M18 nuts	brass		ASMM1800
	stainless steel		ASMM1802
	plastic	1 pc	ASMK1802 (8 mm thickness)
	plastic	100 pcs	ASMK1801 (4 mm thickness)
M30 nuts	brass	100 pcs	ASMM3000
M8 Washer	brass	1,000 pcs	ASZA0800
M12 Washer	brass	1,000 pcs	ASZA1200
M12 Washer	stainless steel	500pcs	ASZA1201
M18 Washer	brass	100 pcs	ASZA1801
M18 Washer	stainless steel	200 pcs	ASZA1802
M30 Washer	brass	100 pcs	ASZA3001

E39/Y92E-B

Accessories

Mounting brackets

Shape	Type	Order code
	Quick access - snap fix for cylindrical sensors; sizes M8, M12, M18, M30	Y92E-BC08 Y92E-BC12 Y92E-BC18 Y92E-BC30
	Surface mounting for M18 cylindrical sensors (dia 18mm)	E39-L183
	Standard-surface mounting (for pre-wired or pigtail models)	E39-L1041
	Standard-backwall mounting	E39-L441
	Protection-wall mounting (for pre-wired or pigtail models)	E39-L1421
	Protection-surface mounting	E39-L981
	Telescope mounting	E39-L93FH
	3D rotation mounting	E39-EL4

1. The order references are examples for the E3Z sensor family. Refer to the sensor accessory datasheet E26E for the complete list of mounting brackets.

Reflectors for retro-reflective photoelectric sensors

Type	Housing material	Features	Size in mm	Applicable Sensor	Order code
General purpose reflectors	ABS base Acrylic surface	Surface screw mounting (diagonal holes)	40 × 60 × 7.5	Retro-reflective photoelectric sensors with and without M.S.R	E39-R1S
		Surface screw mounting (holes on one side only)	35.4 × 42.3 × 8		E39-R9
		Surface screw mounting (holes on one side only)	51.4 × 60.3 × 8.5		E39-R42
Small size		Side screw mounting or surface selfadhesive	41.8 × 22.5 × 11		E39-R3
Small size		Surface screw mounting	23 × 13.7 × 4.9		E39-R4
Large size			100 × 100 × 9		E39-R8
Large size			84.5 × 84.5 × 8.7		E39-R40
High precision		Microtripel for improved performance with fine beam sensors	52 × 40 × 4.8	Recommended for fine beam coaxial models (E3NC-LH03, E3S-DB, E3T-SR4)	E39-R6
			30 × 45		E39-R12
			14 × 23 × 1		E39-R37-CA
			12 × 24		E39-R13
Simple mounting		Round shape with centered mounting hole for simple screw mounting	Diameter: 84 Depth: 7.4	Photoelectric sensors with and without M.S.R.	E39-R7

Note: the ambient operating temperature is -25°C to 55°C unless otherwise specified

Shape	Type	Housing material	Features	Size in mm	Applicable Sensor		Order code
	Enhanced detergent resistance	PVC	Surface screw mounting IP69k after DIN 40050 part 9	40 × 60 × 7.5	Recommended for harsh environment sensors		E39-R50
		PET	Surface screw mounting IP69k after DIN 40050 part 9 Anti-fogging coating	40 × 60 × 7.5			E39-R50K
		PVC	Surface screw mounting IP69k after DIN 40050 part 9	20 × 60 × 6			E39-R51
	Highest detergent resistance	SUS316L Borosilicat	Surface screw mounting	43 × 30 × 5			E39-R16
	Heat resistant	Borosilicat	Surface screw mounting 450°C heat resistance Suitable for vacuum environment	95 × 51 × 8			E39-R47
	Non-fogging reflector	ABS Acrylic surface	Anti-fogging coating	40 × 60 × 7.5			E39-R1K
	Special polarizing	ABS base PMMA surface	Special polarizing filter to PET	44 × 80 × 8.5	E3ZM-B, E3FA-B, E3FB-B, E3S-DB		E39-RP1
	Oil-resistant Reflector	Methacrylate resin surface Aluminium, Stainless steel screws	Resistant to cutting oil	65.4 × 106 × 11.5	E3ZR-C		E39-R1R
	General purpose tape reflectors	Acrylic	Self adhesive Pre cut	35 × 10 × 0.6	Photoelectric sensors with and without M.S.R.		E39-RS1
				35 × 10 × 0.6		Optimised for E3T-SR4	E39-RS1-CA
				40 × 35 × 0.6			E39-RS2
				40 × 35 × 0.6		Optimised for E3T-SR4	E39-RS2-CA
				80 × 70 × 0.6			E39-RS3
				80 × 70 × 0.6		Optimised for E3T-SR4	E39-RS3-CA
			Self adhesive Cut-to-length, roll material	25 mm × 5 m			E39-RS25 5 m
				25 mm × 22.8 m			E39-RS25 22.8 m
				50 mm × 5 m			E39-RS50 5 m
				50 mm × 22.8 m			E39-RS50 22.8 m
	High precision tape reflectors		Self adhesive Pre cut	195 × 22	Recommended for fine beam and laser sensors (E3NC-LH03, E3Z-LR, E3S-DB_2)		E39-RS4
	High precision tape reflectors		Self adhesive Pre cut	108 × 46			E39-RS5