E3Z

Связаться с отделом продаж

Датчики общего назначения в компактном пластиковом корпусе

См. также лазерный датчик E3Z для обеспечения большей точности и большего расстояния

Компактный корпус и мощный светодиод обеспечивают превосходное сочетание функциональности и компактности.
Исполнения IP67 и IP69k для максимальной защиты в условиях повышенной влажности
Тщательное экранирование для достижения наивысшей помехоустойчивости (ЭМС)
Жесткий корпус из полибутилентерефталата (PBT) для повышенной механической прочности

One mounting

Ambient light immunity

Никогда невозможно полностью контролировать условия окружающей среды при эксплуатации больших систем, например, систем для обработки материалов или логистических систем. Надежная работа датчиков имеет ключевое значение для обеспечения круглосуточной работы этих систем. Окружающий свет может вызвать ложные срабатывания у обычных датчиков, что может привести к неправильной последовательности триггерных сигналов. Технология импульсной синхронизации Omron и длина волны света проходящего через фильтр обеспечивают защиту датчика от влияния внешнего освещения и предохраняет от ошибок при обнаружении объектов.

EMC noise immunity

Высокая устойчивость к электромагнитным помехам

IP69k

Тест IP69K в соответствии с DIN 40 050 часть 9 предназначен для имитации воздействия горячей воды под высоким. Во время испытания 14-16 л / мин воды при температуре 80 º C подается на датчик под разными углами под давлением 8000-10000 кПа. Датчик не должен повреждаться от пагубных последствий воздействия водой под высоким давлением по внешнему виду и функциональности.

Ordering information

Sensor type		Sensing distance	Connection method				Order code1
							NPN output	PNP output


Through-beam		30 m (Infrared light)	−	−	2 m	For ordering pigtail versions replace '2M' of cable types with: - M1J: M12 with 30 cm cable - M3J: M8 4-pin with 30 cm cable - M5J: M8 3-pin with 30 cm cable	E3Z-T62 2M	E3Z-T82 2M
		30 m (Infrared light)	⬛	−	−		E3Z-T67	E3Z-T87
		10 m (Red light)	−	−	2 m		E3Z-T61A 2M	E3Z-T81A 2M
		10 m (Red light)	⬛	−	−		E3Z-T66A	E3Z-T86A
Retro-reflective with M.S.R.		0.1 to 4 m2 (Red light)	−	−	2 m		E3Z-R61 2M	E3Z-R81 2M
Retro-reflective with M.S.R.		0.1 to 4 m2 (Red light)	⬛	−	−		E3Z-R66	E3Z-R86
Retro-reflective without M.S.R.		0.1 to 5 m2 (Infrared light)	−	−	2 m		E3Z-R61-4 2M	E3Z-R81-4 2M
Retro-reflective without M.S.R.		0.1 to 5 m2 (Infrared light)	⬛	−	−		E3Z-R66-4	E3Z-R86-4
Diffuse-reflective		1 m (adjustable) (Infrared light)	−	−	2 m		E3Z-D62 2M	E3Z-D82 2M
Diffuse-reflective		1 m (adjustable) (Infrared light)	⬛	−	−		E3Z-D67	E3Z-D87
Diffuse-reflective wide beam		100 mm (adjustable) (Infrared light)	−	−	2 m		E3Z-D61 2M	E3Z-D81 2M
Diffuse-reflective wide beam		100 mm (adjustable) (Infrared light)	⬛	−	−		E3Z-D66	E3Z-D86
Distance settable (background suppression)	Small spot (Red light)		−	−	2 m		E3Z-LS63 2M	E3Z-LS83 2M
	Small spot (Red light)		⬛	−	−		E3Z-LS68	E3Z-LS88
	Standard (Red light)		−	−	2 m		E3Z-LS61 2M3	E3Z-LS81 2M3
	Standard (Red light)		⬛	−	−		E3Z-LS663	E3Z-LS863

Specifications

Item		Through-beam		Retro-reflective with M.S.R	Retro-reflective without M.S.R	Diffuse-reflective	Diffuse-reflective (wide beam)	Distance-settable (background suppression)
				Retro-reflective with M.S.R	Retro-reflective without M.S.R			Standard	Small spot
				Red LED	Infrared LED			Standard	Small spot
NPN		E3Z-T62/T67	E3Z-T61A/T66A	E3Z-R61/R66	E3Z-R6_-4	E3Z-D62/D67	E3Z-D61/D66	E3Z-LS61/66	E3Z-LS63/68
PNP		E3Z-T82/T87	E3Z-T81A/T86A	E3Z-R81/R86	E3Z-R8_-4	E3Z-D82/D87	E3Z-D81/D86	E3Z-LS81/86	E3Z-LS83/88
Directional angle		Both emitter and receiver: 3° to 15°		2° to 10°		−
Black/white error		−						10% of set distance max.	5% of set distance max.
Light source (wave length)		Infrared LED (870 nm)	RED LED (700 nm)	Red LED (680 nm)	Infrared LED (870 nm)	Infrared LED (860 nm)		Red LED (680 nm)	Red LED (650 nm)
Power supply voltage		12 to 24 VD±10%, ripple (p-p): 10% max.
Protective circuits		Reverse polarity protection, shortcircuit protection, output reverse polarity protection	Output short-circuit protection, power supply, reverse polarity protection	Reverse polarity protection, output short-circuit protection, mutual interference prevention, output reverse polarity protection				Reverse polarity protection, output short-circuit protection, mutual interference prevention
Response time		2 ms max.	1 ms max.
Ambient temperature	Operating	−25 to 55°C
Ambient temperature	Storage	−40 to 70°C (with no icing or condensation)
Degree of protection		IEC 60529 IP67, IP69K after DIN 40050 part 9
Material	Case	PBT (polybutylene terephthalate)
Material	Lens	Denatured polyacrylate resin		Methacrylate resin		Denatured polyacrylate resin

1. Light-ON/Dark-ON switch selectable

2. Measured with E39-R1S

3. For infrared LED models contact your Omron representative

1. Light-ON/Dark-ON switch selectable

2. Measured with E39-R1S

3. For infrared LED models contact your Omron representative

Cable connectors

Size	Shape	Type	Features	Material		Order code
Size	Shape	Type	Features	Nut	Cable	Connector straight	Connector l-shaped
M8			3 pin	Brass (CuZn)	PVC 2 m	XS3F-M8PVC3S2M	XS3F-M8PVC3A2M
			3 pin		PUR 2 m	XS3F-M8PUR3S2M	XS3F-M8PUR3A2M
			4pin		PVC 2 m	XS3F-M8PVC4S2M	XS3F-M8PVC4A2M
			4pin		PUR 2 m	XS3F-M8PUR4S2M	XS3F-M8PUR4A2M
			3 pin	Brass (CuZn)	PVC 2 m	XS3F-LM8PVC3S2M	XS3F-LM8PVC3A2M
			4 pin	Brass (CuZn)	PVC 2 m	XS3F-LM8PVC4S2M	XS3F-LM8PVC4A2M
		Detergent resistant Wash-down	4 pin	Stainless steel (SUS316L)	PP1 2 m	Y92E-S08PP4S 2M-L	Y92E-S08PP4A 2M-L
		Robotic (drag chain)	4 pin	Brass (CuZn)	Robotic PVC 2 m	XS3F-M421-402-R	XS3F-M422-402-R
		Robotic (drag chain)			Robotic PUR 2 m	Y92E-M08PUR4S2M-L	Y92E-M08PUR4A2M-L
		High robotic (drag chain & torsion)			High robotic PUR 2 m	Y92E-M08PUR4S2M-R	Y92E-M08PUR4A2M-R
M122			3 wire	Brass (CuZn)	PVC 2 m	XS2F-M12PVC3S2M	XS2F-M12PVC3A2M
			3 wire		PUR 2 m	XS2F-M12PUR3S2M	XS2F-M12PUR3A2M
			4 wire		PVC 2 m	XS2F-M12PVC4S2M	XS2F-M12PVC4A2M
			4 wire		PUR 2 m	XS2F-M12PUR4S2M	XS2F-M12PUR4A2M
			5 wire		PVC 2 m	XS2F-M12PVC5S2M	XS2F-M12PVC5A2M
			5 wire		PUR 2 m	XS2F-M12PUR5S2M	XS2F-M12PUR5A2M
			3 wire	Brass (CuZn)	PVC 2 m	XS2F-LM12PVC3S2M	XS2F-LM12PVC3A2M
			4 wire	Brass (CuZn)	PVC 2 m	XS2F-LM12PVC4S2M	XS2F-LM12PVC4A2M
		LED (power and output LED, PNP/NPN)	3 wire	Nickel plated brass	PVC 2 m	–	XS2F-M12PVC3A2MPLED
			4 wire		PVC 2 m	–	XS2F-M12PVC4A2MPLED
			3 wire		PUR 2 m	–	XS2F-M12PUR3A2MPLED
			4 wire		PUR 2 m	–	XS2F-M12PUR4A2MPLED
		Detergent resistant Wash-down	4 wire	Stainless steel (SUS316L)	PP1 2 m	Y92E-S12PP4S 2M-L	Y92E-S12PP4A 2M-L
		105°C Heat resistant	4 wire	Stainless steel (SUS316L)	Heat resistant PVC 2 m	XS2F-E421-D80-E	XS2F-E422-D80-E
		Twist & click	4 wire	Nickel plated Zinc	PVC 2 m	XS5F-D421-D80-F	XS5F-D422-D80-F
		Twist & click	4 wire	Nickel plated Zinc	PUR 2 m	XS5F-D421-D80-P	XS5F-D422-D80-P
		Robotic (drag chain)	4 wire	Brass (CuZn)	Robotic PVC 2 m	XS2F-D421-D80-F	XS2F-D422-D80-F
		Robotic (drag chain)			Robotic PUR 2 m	Y92E-M12PUR4S2M-L	Y92E-M12PUR4A2M-L
		High robotic (drag chain & torsion)			High grade robotic PUR 2 m	Y92E-M12PUR4S2M-R	Y92E-M12PUR4A2M-R
		8 pin	8 wire shielded cable	Brass (CuZn)	Shielded PUR 2m	Y92E-M12PURSH8S2M-L	–
Fiber amplifier (E3X) connector		Fiber amplifier connectors	Special fiber connector - 4 wire	PBT	PVC 2 m	E3X-CN21
			Special fiber connector + M8 plug	Plug: Zinc diecast	PVC 30 cm with M8 4-pin plug	E3X-CN21-M3J-2 0.3M
			Special fiber connector + M12 plug	Plug: Zinc diecast	PVC 30 cm with M12 4-pin plug	E3X-CN21-M1J 0.3M

Size	Shape	Type	Features	Material		Order code
Size	Shape	Type	Features	Nut	Cable	Connector straight	Connector l-shaped
M8/M12		Confection-able	Plugs and connectors for self assembly	Brass	n.a.	XS2C/G, XS5C/G Y92E_conf
M12		Field I/0 boxes	Direct wiring or DeviceNet communication	–		XW3D
M8/M12		T-connectors, covers, accessories and extended wiring portfolio	n.a.	–		XS2R, XS3R, XY2F, ...

1. PP - polypropylene

2. For details on pin configuration refer to specifications

Mounting brackets

Type	Material	Features	Order code
M8 nuts	brass	100 pcs	ASMM0800
M8 nuts	stainless steel		ASMM0801
M12 nuts	brass		ASMM1200
M18 nuts	brass		ASMM1800
	stainless steel		ASMM1802
	plastic	1 pc	ASMK1802 (8 mm thickness)
	plastic	100 pcs	ASMK1801 (4 mm thickness)
M30 nuts	brass	100 pcs	ASMM3000
M8 Washer	brass	1,000 pcs	ASZA0800
M12 Washer	brass	1,000 pcs	ASZA1200
M12 Washer	stainless steel	500pcs	ASZA1201
M18 Washer	brass	100 pcs	ASZA1801
M18 Washer	stainless steel	200 pcs	ASZA1802
M30 Washer	brass	100 pcs	ASZA3001

E39/Y92E-B

Accessories

Mounting brackets

Shape	Type	Order code
	Quick access - snap fix for cylindrical sensors; sizes M8, M12, M18, M30	Y92E-BC08 Y92E-BC12 Y92E-BC18 Y92E-BC30
	Surface mounting for M18 cylindrical sensors (dia 18mm)	E39-L183
	Standard-surface mounting (for pre-wired or pigtail models)	E39-L1041
	Standard-backwall mounting	E39-L441
	Protection-wall mounting (for pre-wired or pigtail models)	E39-L1421
	Protection-surface mounting	E39-L981
	Telescope mounting	E39-L93FH
	3D rotation mounting	E39-EL4

1. The order references are examples for the E3Z sensor family. Refer to the sensor accessory datasheet E26E for the complete list of mounting brackets.

Reflectors for retro-reflective photoelectric sensors

Type	Housing material	Features	Size in mm	Applicable Sensor	Order code
General purpose reflectors	ABS base Acrylic surface	Surface screw mounting (diagonal holes)	40 × 60 × 7.5	Retro-reflective photoelectric sensors with and without M.S.R	E39-R1S
		Surface screw mounting (holes on one side only)	35.4 × 42.3 × 8		E39-R9
		Surface screw mounting (holes on one side only)	51.4 × 60.3 × 8.5		E39-R42
Small size		Side screw mounting or surface selfadhesive	41.8 × 22.5 × 11		E39-R3
Small size		Surface screw mounting	23 × 13.7 × 4.9		E39-R4
Large size			100 × 100 × 9		E39-R8
Large size			84.5 × 84.5 × 8.7		E39-R40
High precision		Microtripel for improved performance with fine beam sensors	52 × 40 × 4.8	Recommended for fine beam coaxial models (E3NC-LH03, E3S-DB, E3T-SR4)	E39-R6
			30 × 45		E39-R12
			14 × 23 × 1		E39-R37-CA
			12 × 24		E39-R13
Simple mounting		Round shape with centered mounting hole for simple screw mounting	Diameter: 84 Depth: 7.4	Photoelectric sensors with and without M.S.R.	E39-R7

Note: the ambient operating temperature is -25°C to 55°C unless otherwise specified

Shape	Type	Housing material	Features	Size in mm	Applicable Sensor		Order code
	Enhanced detergent resistance	PVC	Surface screw mounting IP69k after DIN 40050 part 9	40 × 60 × 7.5	Recommended for harsh environment sensors		E39-R50
		PET	Surface screw mounting IP69k after DIN 40050 part 9 Anti-fogging coating	40 × 60 × 7.5			E39-R50K
		PVC	Surface screw mounting IP69k after DIN 40050 part 9	20 × 60 × 6			E39-R51
	Highest detergent resistance	SUS316L Borosilicat	Surface screw mounting	43 × 30 × 5			E39-R16
	Heat resistant	Borosilicat	Surface screw mounting 450°C heat resistance Suitable for vacuum environment	95 × 51 × 8			E39-R47
	Non-fogging reflector	ABS Acrylic surface	Anti-fogging coating	40 × 60 × 7.5			E39-R1K
	Special polarizing	ABS base PMMA surface	Special polarizing filter to PET	44 × 80 × 8.5	E3ZM-B, E3FA-B, E3FB-B, E3S-DB		E39-RP1
	Oil-resistant Reflector	Methacrylate resin surface Aluminium, Stainless steel screws	Resistant to cutting oil	65.4 × 106 × 11.5	E3ZR-C		E39-R1R
	General purpose tape reflectors	Acrylic	Self adhesive Pre cut	35 × 10 × 0.6	Photoelectric sensors with and without M.S.R.		E39-RS1
				35 × 10 × 0.6		Optimised for E3T-SR4	E39-RS1-CA
				40 × 35 × 0.6			E39-RS2
				40 × 35 × 0.6		Optimised for E3T-SR4	E39-RS2-CA
				80 × 70 × 0.6			E39-RS3
				80 × 70 × 0.6		Optimised for E3T-SR4	E39-RS3-CA
			Self adhesive Cut-to-length, roll material	25 mm × 5 m			E39-RS25 5 m
				25 mm × 22.8 m			E39-RS25 22.8 m
				50 mm × 5 m			E39-RS50 5 m
				50 mm × 22.8 m			E39-RS50 22.8 m
	High precision tape reflectors		Self adhesive Pre cut	195 × 22	Recommended for fine beam and laser sensors (E3NC-LH03, E3Z-LR, E3S-DB_2)		E39-RS4
	High precision tape reflectors		Self adhesive Pre cut	108 × 46			E39-RS5